Discrete Analysis

• True sample blanking
• No flowing streams
• No pump tubes
• No base line stabilization
• No shutdown
• No hardware changes
• Minimize hazardous waste
• Use only volumes the method requires
• Each reaction in its own cuvette

SmartStart Software

• Ready to run with one click
• True unattended operation, including after hours
• Unlimited number of methods ready to be run at any time
• Automated method changeovers
• Automatic standards preparation
• Automatic dilutions
• Automatic spikes

Computer controlled micro pipettor

• Precise dispensing of all liquids
• Probe cleaning after every liquid contact prevents cross contamination and carryover
• Reduction of reagents and hazardous wastes
• An integral sensor for low level alerts

Wash Station

• Automatic cuvette cleaning provides continuous operation
• Reduce operating costs
• Optical integrity of each cuvette is verified before each use

Photometer

• A high resolution, dual beam digital detector
• Expanded absorbance range to 2.500AUFS reduces the need to reanalyze over range samples
• 5 detection modes:endpoint, fixedtime, differential, bichromatic, and kinetic

Nitrate - Nitrite Module

• Replicates USEPA Method #353.2
• Automated cadmium reduction of nitrate to nitrite followed by diazotization and coupling
• Total Nitrite is determined by diazotizing with sulfanilamide and coupled with N-1-naphthylethylene.HCl and the color intensity is measured at 520 to 540 nm
• Reagent concentrations and molar ratios used in the SmartChem method are identical to US EPA method 353.2

Continuous sample loading

• Sample racks may be exchanged without interrupting the analysis Reaction Plate
• Accurately maintains temperature +/- 0.1°C

Filter wheel

• 9 optical filters, plus 1 dark filter, ranging from420 to 880 nm with others optionally available

Options

• ISEdetector
• Barcodereader